Apex Wolff Indiana Fly Tying Vise

APEX VISE INSTRUCTION

VISE HEAD POSITION:
Tighten or loosen the top screw at the jaw and stem connection with the large Allen wrench provided. Now you are able to rotate the Vise head to your desired tying level. You may also reverse the Vise head to a left-hand tying position by removing the screw and re-positioning the Vise head on the stem in the opposite direction. HOOK–Inside the Jaws are machined grooves to accommodate various hook sizes. The large hooks are to be positioned in the back of the Jaw with the small hooks utilizing the area at the Jaw tip. Large hooks back/small hook front.

JAWS:
Open the Jaws with the adjusting nut located directly behind the Vise Jaw opening. Turn the Adjusting nut counterclockwise to open for positioning of your fly hook. You will use the hook as your guide when opening the jaws. Open the jaws only as far as necessary to capture the hook. Reverse this process to tighten and hold the hook in place.

LOCK HANDLE:
Push the Lock Handle down to lock the hook into place at your desired tying position. Reverse this operation to release the hook for hook removal.

BLACK WING NUT:
Loosen the black wing nut on the Vise head. This will allow you to rotate the Vise head freely using the lock handle. Tighten to stop this action.

Contact us for details and current inventory.